Industrial Bandsaws

Vertical Saws

• Model 204
  A versatile vertical blade bandsaw designed to cut low and medium density materials such as insulation, rigid foams, honeycomb materials, refractory materials, plastic pipe.
• Model 214
  A vertical blade bandsaw whose saw head tilts, allowing the blade to cut at any angle from vertical to 22-1/2° off vertical.
• Model 230
  Vertical blade bandsaw with bearing mounted moving table allows for straight cuts even with heavy or awkward pieces.
• Model 236
  A Vertical blade bandsaw designed to rapidly and accurately cut a wide range of low and medium density materials. Table surface is durable 12 Ga. Steel. 
• Model 236 Heavy
  The “Heavy" version of the Model 236 adds a rail mounted table, rated for up to 800 pound workpieces.
• Model 2054
  This vertical blade bandsaw employs a rail mounted moving table which allows for straight cuts, even with heavy or awkward pieces.
• Precision Workpiece Positioning Fence
  Available as an optional add-on to all vertical saws, a precision fence increases the usefulness of Forrest saws by serving as a rip guide, precision workpiece positioning tool, and squaring tool.
• > Powered Table Drive System
• Laser Guideline Light
  improves cut accuracy and productivity by casting a bright red line on the workpiece where the blade will pass through the material.

Horizontal Saws

• Model 480
  A rail mounted moving table allows for straight cuts even with heavy or awkward pieces.
• Model 530
  This unit is designed to horizontally split blankets of insulation material into two separate blankets of any arbitrary thickness, and recoil the two blankets.
• Model H3
  The Model H3 is designed to make parallel cuts or angled cuts in low and medium density materials such as insulation materials, rigid foams, and plastics.
• Magnum Horizontal Saw
  The Magnum Horizontal saw is designed for cutting sheets off large, heavy blocks of material such as urethane, balsa, and other medium density materials.

Tilting Head Saws

• Model 214
  A vertical blade bandsaw whose saw head tilts, allowing the blade to cut at any angle from vertical to 22-1/2° off vertical.
• Model B2
  A medium sized high speed bandsaw designed for cutting light and medium density materials such as those used for insulation.
• Model 2214
  A unit whose angled blades can be manually adjusted. Designed to make parallel or angled cuts in low or medium-density materials, i.e. insulation.

Multi-Blade Saws

• Model 106
  Specifically designed for fabricators of insulation curved sidewall segments and pipe covering segments, this unit features two parallel high-speed blades which simultaneously cut inner and outer radii on insulation pieces.
• Model 2140
  The Model 2140 is designed to make parallel cuts in low and medium density materials such as insulation materials, rigid foams, and plastics.
• Model 2214
  A unit whose angled blades can be manually adjusted. Designed to make parallel or angled cuts in low or medium-density materials, i.e. insulation.
• Model 480M
  Features a horizontal saw head has a powered, variable speed raise/lower mechanism. Designed to quickly square, trim, and cut sheets from large blocks of rigid foam, insulation, or other low density material.

Radius Cutting Saws

• Model 103
  The Model 103 is designed for fabricating pipe insulation half-rounds from stock material.
• Model 106
  Specifically designed for fabricators of insulation curved sidewall segments and pipe covering segments, this unit features two parallel high-speed blades which simultaneously cut inner and outer radii on insulation pieces.