Sheet Metal Cutand Roll Machine


Forrest's Sheet Metal Cut and Roll Machine Model 648P automatically cuts to length and rolls metal insulation jacketing. The operator loads rolls of jacketing onto the material support cradle, sets the number of pieces to be cut, sets the length and rolled diameter of the finished pieces, then just presses the “start” button. This insulation jacketing machine comes with powered cradle rollers that support and unwind the material; flattening rollers push the material past the blade and into the forming rollers, the blade makes the cut and the material is automatically fed into the forming roller. See our other types of Sheet Metal Fabrication Equipment offered as well.

The model 648P sheet metal cutting machine is extremely durable and easy to use. The sturdy design proves reliable even in the worst shop conditions. A newly redesigned control box on the machine makes troubleshooting a cinch.

Request More Info

Sheet Metal Cut and Roll Machine

Sheet Metal Cut and Roll Machine

Industrial Bandsaws and Metal Working Equipment for Industry

Model 648PDemonstration


Demonstration of the Forrest Manufacturing Model 648P power shear and rolls


  • Material capacity 0.024 inch thick.
  • Minimum formed diameter 3-1/2 inches.
  • Maximum piece length 144 inches.
  • Hardened cutting edge goes years between sharpening. 
  • Pinch roller diameter is 1.75 inches, other rollers are 2.125 inches. 
  • Works with faced or un-faced metal. 

Available Options

  • Electrical service 120 volts 25 amps
  • Compressed air service approximately 5.4 SCFM at 100 psi or a 2 hp compressor (not included)
  • Machine footprint 6 x 20 ft.
  • Ships in 2 crates

Shipping Information

  • Crate 1: Weight, Standard: 500 pounds
  • Crate 1: Shipping Dimensions: 54" W x 174" L x 36" H
  • Crate 2: Weight, Standard: 2,000 pounds
  • Crate 2: Shipping Dimensions: 71" W x 84" L x 65" H

Send us a message


Call us today at713-864-2545

Forrest Mfg. Co.
2825 West 11th Street
Houston, TX 77008
Fields marked with * are required.